Application
The Enamel is applied to paint the wood, metallic, other surfaces, used outdoors and indoors.
ADVANTAGES
The enamel protects effectually the surface from humidity impact, frost and other atmospheric phenomena, adds its highly esthetic appearance. It doesn’t contain lead.
Surface preparation
Before surface painting, it should be cleaned up from dust, dirt, rust, grease and other contaminants, oxidation. If it is necessary, you can cover the surface with rust solvent “Contrast” (metallic surface), a means for wood material biodefense (wood surface), apply primer GF 021, primer PF 078 or rust primer “Primer-Defense”.
Enamel preparation
Before enamel application, it should be stirred thoroughly and if it is necessary to dilute with solvents, white spirit, thinner UETS, turpentine or with the mixtures of the mentioned thinners in the ratio 1: 1.
Application methods
With the help of spray, jet doused, dipping, roller, brush methods. Spray, roller or brush painting is recommended in two layers. The time between the applying of the first and second layer should make 24 hours.
Guarantee storage life
12 months from the production date
Enamel consumption for the first layer | 80-100 g/m² |
Funnel viscosity by viscometer VZ-4 | 80-120 s |
Dried film coating | 40-100 g/m² |
Time for complete drying at temperature (20±2) °С | not more than 24 h |
Сертифікат якості на емаль ПФ-115
file size 1,09 MБ Download
Application
The Enamel is applied to paint the wood, metallic, other surfaces, used outdoors and indoors.
ADVANTAGES
The enamel protects effectually the surface from humidity impact, frost and other atmospheric phenomena, adds its highly esthetic appearance. It doesn’t contain lead.
Surface preparation
Before surface painting, it should be cleaned up from dust, dirt, rust, grease and other contaminants, oxidation. If it is necessary, you can cover the surface with rust solvent “Contrast” (metallic surface), a means for wood material biodefense (wood surface), apply primer GF 021, primer PF 078 or rust primer “Primer-Defense”.
Enamel preparation
Before enamel application, it should be stirred thoroughly and if it is necessary to dilute with solvents, white spirit, thinner UETS, turpentine or with the mixtures of the mentioned thinners in the ratio 1: 1.
Application methods
With the help of spray, jet doused, dipping, roller, brush methods. Spray, roller or brush painting is recommended in two layers. The time between the applying of the first and second layer should make 24 hours.
Guarantee storage life
12 months from the production date
Enamel consumption for the first layer | 80-100 g/m² |
Funnel viscosity by viscometer VZ-4 | 80-120 s |
Dried film coating | 40-100 g/m² |
Time for complete drying at temperature (20±2) °С | not more than 24 h |
Сертифікат якості на емаль ПФ-115
file size 1,09 MБ Download