Application
To paint the wood, metallic floor and other surfaces used outdoors and indoors.
ADVANTAGES
The enamel protects effectually the surface from humidity impact, frost and other atmospheric phenomena, adds its highly esthetic appearance. It doesn’t contain lead.
Surface preparation
Before surface painting, it should be cleaned up from dust, dirt, rust, grease and other contaminants, oxidation.
Enamel preparation
Before enamel application, it should be stirred thoroughly and if it is necessary to dilute with white spirit, thinner UETS, solvents, turpentine or with the mixtures of the mentioned thinners in the ratio 1: 1, up to 5% by the enamel weight.
Application methods
With the help of spray, jet doused, dipping, roller, brush methods. Spray, roller or brush painting is recommended in two layers. The time between the applying of the first and second layer should make 24 hours.
Guarantee storage life зберігання
12 months from the production date
| Enamel consumption for the first layer | 80-120 g/m² |
| Funnel viscosity by viscometer VZ-246 with nozzle diameter of 4 mm at temperature (20±0,5) °С | 50-130 s |
| Mass fraction of nonvolatile substances | 67±7 % |
| Grinding degree | not more than 60 mkm |
| Dried film coating | not more than 100 g/m² |
| Time for complete drying at temperature (20±2) °С | 12 h |
| The film elasticity at a bend | 3 mm |
| The film hardness by pendulum device | 0,2 у.о. |
| Coating resistance to static action of the 0,5% detergent solution | Not less than 20min. |
Application
To paint the wood, metallic floor and other surfaces used outdoors and indoors.
ADVANTAGES
The enamel protects effectually the surface from humidity impact, frost and other atmospheric phenomena, adds its highly esthetic appearance. It doesn’t contain lead.
Surface preparation
Before surface painting, it should be cleaned up from dust, dirt, rust, grease and other contaminants, oxidation.
Enamel preparation
Before enamel application, it should be stirred thoroughly and if it is necessary to dilute with white spirit, thinner UETS, solvents, turpentine or with the mixtures of the mentioned thinners in the ratio 1: 1, up to 5% by the enamel weight.
Application methods
With the help of spray, jet doused, dipping, roller, brush methods. Spray, roller or brush painting is recommended in two layers. The time between the applying of the first and second layer should make 24 hours.
Guarantee storage life зберігання
12 months from the production date
| Enamel consumption for the first layer | 80-120 g/m² |
| Funnel viscosity by viscometer VZ-246 with nozzle diameter of 4 mm at temperature (20±0,5) °С | 50-130 s |
| Mass fraction of nonvolatile substances | 67±7 % |
| Grinding degree | not more than 60 mkm |
| Dried film coating | not more than 100 g/m² |
| Time for complete drying at temperature (20±2) °С | 12 h |
| The film elasticity at a bend | 3 mm |
| The film hardness by pendulum device | 0,2 у.о. |
| Coating resistance to static action of the 0,5% detergent solution | Not less than 20min. |
With this product buy