Enamel PF-115 Application
It is used to paint wood, metallic and other surfaces that are exploited outdoors and indoors
Enamel PF-115 Advantages
Enamel protects effectually the surface from humidity, frost and other atmospheric phenomena, adds its highly esthetic appearance. Doesn’t contain lead.
Surface preparation
Before surface painting, it should be cleaned up from dust, dirt, rust, grease and other contaminants, scale, if it is necessary, cover it with rust solvent “Contrast” (metallic surface), a means for wood material biodefense (wood surface), apply primer GF 021, PF 078 or primer on rust “Primer-Defense”
Enamel preparation
Before enamel application, it should be stirred thoroughly and if it is necessary to dilute with solvent, white spirit, thinner UETS, turpentine or with their mixture in the ratio 1: 1.
Application methods
Spray jet doused, dipping, roller, brush. To apply enamel, spray, roller or brush painting is recommended in two layers. The time between the applying of the first and second layer should make 24 hours.
12 months from the production date
Enamel consumption for the first layer | 80-100 g/m² |
Funnel viscosity by viscometer BЗ-4 | 80-120 с |
Mass fraction of nonvolatile substances | 57-70 % |
Grinding degree | Not more than 25 mкm |
Dried film coating depending on colour | 40-100 g/m² |
Time for complete drying temperature (20±2) °С | Not more than 24 h |
The film elasticity at a bend | Not more than 1 mm |
The film hardness by pendulum device | Not less than 0,25 у.о. |
The film adhesion | Nor more than 1 ball |
Coating resistance at temperature (20 ± 2) ° C to static action of water | Not less than 2 h |
Сертифікат якості на емаль ПФ-115
file size 1,09 MБ Download
Enamel PF-115 Application
It is used to paint wood, metallic and other surfaces that are exploited outdoors and indoors
Enamel PF-115 Advantages
Enamel protects effectually the surface from humidity, frost and other atmospheric phenomena, adds its highly esthetic appearance. Doesn’t contain lead.
Surface preparation
Before surface painting, it should be cleaned up from dust, dirt, rust, grease and other contaminants, scale, if it is necessary, cover it with rust solvent “Contrast” (metallic surface), a means for wood material biodefense (wood surface), apply primer GF 021, PF 078 or primer on rust “Primer-Defense”
Enamel preparation
Before enamel application, it should be stirred thoroughly and if it is necessary to dilute with solvent, white spirit, thinner UETS, turpentine or with their mixture in the ratio 1: 1.
Application methods
Spray jet doused, dipping, roller, brush. To apply enamel, spray, roller or brush painting is recommended in two layers. The time between the applying of the first and second layer should make 24 hours.
12 months from the production date
Enamel consumption for the first layer | 80-100 g/m² |
Funnel viscosity by viscometer BЗ-4 | 80-120 с |
Mass fraction of nonvolatile substances | 57-70 % |
Grinding degree | Not more than 25 mкm |
Dried film coating depending on colour | 40-100 g/m² |
Time for complete drying temperature (20±2) °С | Not more than 24 h |
The film elasticity at a bend | Not more than 1 mm |
The film hardness by pendulum device | Not less than 0,25 у.о. |
The film adhesion | Nor more than 1 ball |
Coating resistance at temperature (20 ± 2) ° C to static action of water | Not less than 2 h |
Сертифікат якості на емаль ПФ-115
file size 1,09 MБ Download
With this product buy