Application
It is intended for the formation of decorative protective lacquering on stone and other porous mineral surfaces, as well as concrete and brick surfaces. It is recommended for processing of masonwork and brickwork on facade and basement structures, fences, monuments, borders and other surfaces.
Qualities
It penetrates deeply into the pores of the surface, thereby reinforcing and preventing it from salt formation, has high atmospheric and abrasion resistance, and resistance to water and salts.
Applying
Lacquer should be stirred thoroughly before applying. It is recommended to apply at temperature from +5°С to + 30°С and relative humidity up to 65%. The lacquer should be applied with a paint-spray gun, a roller or a brush on the dry surface, beforehand cleaned up from dust, rust grease and other dirt. The lacquer should be diluted with white spirit or solvent. The time of the lacquer covering drying at temperature (20±2) °С is up to12 hours. Lacquer consumption is from 50 g/m2 to 100 g/m2 depending on the surface type or the application method.
Precautions
The lacquer should be applied in a well ventilated room. Applying lacquer, rubber gloves and safety glasses should be used. In case of contact with eyes, rinse thoroughly with water.
| Apply at temperature | from +5°С to + 30°С |
| To dilute the lacquer you should use | white spirit or solvent |
| Time of the lacquer covering drying at temperature (20±2) °С | up to 12 h |
| Lacquer consumption | from 50 g/m2 to 100 g/m2 |
Висновок державної санітарно-епідеміологічної служби
file size 451 KБ Download
Application
It is intended for the formation of decorative protective lacquering on stone and other porous mineral surfaces, as well as concrete and brick surfaces. It is recommended for processing of masonwork and brickwork on facade and basement structures, fences, monuments, borders and other surfaces.
Qualities
It penetrates deeply into the pores of the surface, thereby reinforcing and preventing it from salt formation, has high atmospheric and abrasion resistance, and resistance to water and salts.
Applying
Lacquer should be stirred thoroughly before applying. It is recommended to apply at temperature from +5°С to + 30°С and relative humidity up to 65%. The lacquer should be applied with a paint-spray gun, a roller or a brush on the dry surface, beforehand cleaned up from dust, rust grease and other dirt. The lacquer should be diluted with white spirit or solvent. The time of the lacquer covering drying at temperature (20±2) °С is up to12 hours. Lacquer consumption is from 50 g/m2 to 100 g/m2 depending on the surface type or the application method.
Precautions
The lacquer should be applied in a well ventilated room. Applying lacquer, rubber gloves and safety glasses should be used. In case of contact with eyes, rinse thoroughly with water.
| Apply at temperature | from +5°С to + 30°С |
| To dilute the lacquer you should use | white spirit or solvent |
| Time of the lacquer covering drying at temperature (20±2) °С | up to 12 h |
| Lacquer consumption | from 50 g/m2 to 100 g/m2 |
Висновок державної санітарно-епідеміологічної служби
file size 451 KБ Download
With this product buy