Application
It is intended to cover surfaces coated with oil paints; wood and metal surfaces, which are exploited outdoors and indoors. It is used for wooden surfaces impregnation, dilution of oil, PF paints and enamels, preliminary coating of plastered panels before painting. Effective as a substitute for drying oils.
Advantages
The lacquer successfully replaces and exceeds the technical indicators of drying oils. When it is applied on oil or alkyd enamels, the lacquer adds a very high gloss to surface.
Surface preparation - Підготовка поверхні
Before lacquer applying, the wood surface should be thoroughly sanded with sanding paper, the metal surface should be cleaned up from dust and rust and degreased with solvent.
Lacquer preparation
Lacquer should be stirred thoroughly before applying. If it is necessary, it should be diluted with white spirit, thinner UETS. It is forbidden to dilute the lacquer with solvents that are not mentioned above.
Application methods
The lacquer should be applied with a paint-spray gun or a brush.
Guarantee storage life
12 months from the production date
Lacquer colour according to iodimetric scale | l2 / 100 sm3 and not darker than 400 mg |
Lacquer consumption for 1m2 | from 70 g/m2 to 75 g/m2 |
Lacquer film | homogeneous, transparent without extraneous inclusions |
Film gloss by photovoltaic glossiness | 60% and more |
Funnel viscosity by viscometer VZ-246 (or VZ-4) with nozzle diameter of 4 mm at temperature (20±0,5) °С | 40-60 s |
Mass fraction of nonvolatile substances | 49±2% |
Time of the film full drying at temperature (20±2) °С | up to 48 h |
Time of the film full drying at temperature (60±2) °С | up to 4 h |
The film elasticity at a bend | up to 1 mm |
The film hardness by pendulum device | from 0,20 y.o. and more |
Film resistance to the water static effect at temperature(20±2) °С | 8 h and more |
Висновок державної санітарно-епідеміологічної служби гф-166.docx
file size 328,17 KБ Download
Application
It is intended to cover surfaces coated with oil paints; wood and metal surfaces, which are exploited outdoors and indoors. It is used for wooden surfaces impregnation, dilution of oil, PF paints and enamels, preliminary coating of plastered panels before painting. Effective as a substitute for drying oils.
Advantages
The lacquer successfully replaces and exceeds the technical indicators of drying oils. When it is applied on oil or alkyd enamels, the lacquer adds a very high gloss to surface.
Surface preparation - Підготовка поверхні
Before lacquer applying, the wood surface should be thoroughly sanded with sanding paper, the metal surface should be cleaned up from dust and rust and degreased with solvent.
Lacquer preparation
Lacquer should be stirred thoroughly before applying. If it is necessary, it should be diluted with white spirit, thinner UETS. It is forbidden to dilute the lacquer with solvents that are not mentioned above.
Application methods
The lacquer should be applied with a paint-spray gun or a brush.
Guarantee storage life
12 months from the production date
Lacquer colour according to iodimetric scale | l2 / 100 sm3 and not darker than 400 mg |
Lacquer consumption for 1m2 | from 70 g/m2 to 75 g/m2 |
Lacquer film | homogeneous, transparent without extraneous inclusions |
Film gloss by photovoltaic glossiness | 60% and more |
Funnel viscosity by viscometer VZ-246 (or VZ-4) with nozzle diameter of 4 mm at temperature (20±0,5) °С | 40-60 s |
Mass fraction of nonvolatile substances | 49±2% |
Time of the film full drying at temperature (20±2) °С | up to 48 h |
Time of the film full drying at temperature (60±2) °С | up to 4 h |
The film elasticity at a bend | up to 1 mm |
The film hardness by pendulum device | from 0,20 y.o. and more |
Film resistance to the water static effect at temperature(20±2) °С | 8 h and more |
Висновок державної санітарно-епідеміологічної служби гф-166.docx
file size 328,17 KБ Download
With this product buy