- Application
Enamel MC-140 with metallic effect is intended for the decoration of enamel EPF -103 precoated metal and wood products. It provides metallic effect to the painted surface due to special additive components.
Application methods
Enamel MC-140 with metallic effect should be applied to the dry, thoroughly cleaned from dust and dirt surface. Metallic surface, beside this, should be cleaned from the rust and degreased with solvent: UETS, № 646, № 647.
The surfaces, precoated by other paints, are thoroughly cleaned with a wire brush or sanding paper. The layer of enamel EPF-103 black is applied for the primary protective coating.
Enamel MC-140 with metallic effect is applied to the prepared surface with a paint-spray gun with nozzle diameter of 1,4-1,5mm. Metallic effect is achieved only if the enamel is applied with a paint-spray gun. If the enamel is applied with a brush or a roller, the enamel film is flat and smooth, but without metallic effect.
Drying time at temperature (20 ± 2) °C is not more than 24 hours.
Enamel MC-140 with metallic effect is applied at temperatures from +5 to +35 °C.
Enamel MC-140 with metallic effect consumption, depending on the type and condition of the surface for one layer coating, ranges from 70 g/m2 to 100 g/m2.
Drying time at temperature (20±2) °С | not more than 24 h |
Enamel consumption | from 70 g/m2 to 100 g/m2 |
Application temperature | from +5 °C to +35 °C |
metalefekt.docx
file size 138,71 KБ Download
- Application
Enamel MC-140 with metallic effect is intended for the decoration of enamel EPF -103 precoated metal and wood products. It provides metallic effect to the painted surface due to special additive components.
Application methods
Enamel MC-140 with metallic effect should be applied to the dry, thoroughly cleaned from dust and dirt surface. Metallic surface, beside this, should be cleaned from the rust and degreased with solvent: UETS, № 646, № 647.
The surfaces, precoated by other paints, are thoroughly cleaned with a wire brush or sanding paper. The layer of enamel EPF-103 black is applied for the primary protective coating.
Enamel MC-140 with metallic effect is applied to the prepared surface with a paint-spray gun with nozzle diameter of 1,4-1,5mm. Metallic effect is achieved only if the enamel is applied with a paint-spray gun. If the enamel is applied with a brush or a roller, the enamel film is flat and smooth, but without metallic effect.
Drying time at temperature (20 ± 2) °C is not more than 24 hours.
Enamel MC-140 with metallic effect is applied at temperatures from +5 to +35 °C.
Enamel MC-140 with metallic effect consumption, depending on the type and condition of the surface for one layer coating, ranges from 70 g/m2 to 100 g/m2.
Drying time at temperature (20±2) °С | not more than 24 h |
Enamel consumption | from 70 g/m2 to 100 g/m2 |
Application temperature | from +5 °C to +35 °C |
metalefekt.docx
file size 138,71 KБ Download
With this product buy