Application
To paint wood, plastered, reinforced-concrete, metallic surfaces used outdoors and indoors
ADVANTAGES
The enamel protects effectually the surface from humidity impact and other atmospheric phenomena (temperature conditions of enamel coatings exploitation within limits from –30°С to +50°С), adds its highly esthetic appearance. The residue and the film are not formed while preserving. It doesn’t contain lead.
Surface preparation
Before surface painting, it should be cleaned up from dust, dirt, rust, grease and other contaminants, oxidation, if it is necessary, apply the primer GF 021, PF 078 or the anticorrosive primer “Primer-Defense”, VKCH-0207, EF-083, FL-093.
Enamel preparation
Before enamel application, it should be stirred thoroughly and if it is necessary to dilute with thinners such as white spirit, thinner UETS, solvents, turpentine or with the mixture of the mentioned thinners in the ratio 1: 1.
Application methods
With the help of spray, jet doused, dipping, roller, brush methods. Spray, roller or brush painting is recommended in two layers. The time between the applying of the first and second layer should make 24 hours.
Guarantee storage life
12 months from the production date
| Enamel consumption for the first layer | 50-80 g/m² |
| Funnel viscosity by viscometer VZ-4 | 60-120 s |
| Mass fraction of nonvolatile substances | 62-72 % |
| Grinding degree | not more than 25 mkm |
| Dried film coating depending on colour | not more than 100 g/m² |
| Time for complete drying at temperature (20±2) °С | not more than 12 h |
| The film hardness by pendulum device | not less than 0,25 у.о. |
| The film adhesion | not less than 1 ball |
Application
To paint wood, plastered, reinforced-concrete, metallic surfaces used outdoors and indoors
ADVANTAGES
The enamel protects effectually the surface from humidity impact and other atmospheric phenomena (temperature conditions of enamel coatings exploitation within limits from –30°С to +50°С), adds its highly esthetic appearance. The residue and the film are not formed while preserving. It doesn’t contain lead.
Surface preparation
Before surface painting, it should be cleaned up from dust, dirt, rust, grease and other contaminants, oxidation, if it is necessary, apply the primer GF 021, PF 078 or the anticorrosive primer “Primer-Defense”, VKCH-0207, EF-083, FL-093.
Enamel preparation
Before enamel application, it should be stirred thoroughly and if it is necessary to dilute with thinners such as white spirit, thinner UETS, solvents, turpentine or with the mixture of the mentioned thinners in the ratio 1: 1.
Application methods
With the help of spray, jet doused, dipping, roller, brush methods. Spray, roller or brush painting is recommended in two layers. The time between the applying of the first and second layer should make 24 hours.
Guarantee storage life
12 months from the production date
| Enamel consumption for the first layer | 50-80 g/m² |
| Funnel viscosity by viscometer VZ-4 | 60-120 s |
| Mass fraction of nonvolatile substances | 62-72 % |
| Grinding degree | not more than 25 mkm |
| Dried film coating depending on colour | not more than 100 g/m² |
| Time for complete drying at temperature (20±2) °С | not more than 12 h |
| The film hardness by pendulum device | not less than 0,25 у.о. |
| The film adhesion | not less than 1 ball |
With this product buy
